Home Profile Representations Products Clientele Contact

BOSTIK

PRODUCTS RANGE

PU Adhesive - Solvent Less | PU Adhesive - Solvent Base

PU ADHESIVE - SOLVENT LESS

One component;

1- Herberts 1KLF 190 x 3
applies in particular to solventfree where wet-out and optical appearance can be an issue

Two Components;

1- Herberts 2KLF 515 / MP 730
Steam, sterilization, Heat Resistance
Boiling Enhanced Adhesion on metalized film, Adhesion on Alu foil
Facilitate for better performances on metalized films and alu foil, may enable to replace part of solvent based applications.
Part of Modular System whereby you can change the OH components where more higher performance is required, in such case MP 730 can be replace by H 104 +.
2- Purbinder MP 980 / 780
Purbinder MP980 with MP730 is a solvent free two component polyurethane-cross-linking adhesive system being processed at medium low temperature 40°C.
Purbinder MP980 / MP730 is suitable for thermal treatment such as pasteurization and boiling for films laminates.

Back to Top


PU ADHESIVE - SOLVENT BASE;

One Component;

1- LG 31

COLFLEX LG 31 is a solvent based one component polyurethane isocyanate terminated polyurethane adhesive which requires moisture to cure.
COLFLEX LG 31 adhesive is designed for general purpose applications such as transparent films and metallised films.
2- Herberts OP 131
Herberts-OP 131 is a solvent based moisture-curing one component adhesive based on polyurethane.
Herberts-OP 131 is an "all-round"-adhesive for all film/film, film/aluminium, paper and cardboard laminates.
3- Purbinder MP 31
Purbinder MP31 is a solvent based one component polyurethane isocyanate terminated polyurethane adhesive which requires moisture to cure.
Purbinder MP31 adhesive is designed for medium performance applications such as transparent films and metallised films and aluminium foil.

Two Components;

1- Purbinder HPX 5147/C2
PURBINDER HPX 5147 is a polyester based polyurethane adhesive in solvent, when applied along PURBINDER C2, represents a high performance two-components adhesive system.

The laminates obtained with PURBINDER HPX 5147/C2 adhesive have outstanding heat, mechanical, chemical resistance and can be sterilised (30’ at 126°C).
2- Purbinder HPX 5147/C2
PURBINDER HPX 5147 is a polyester based polyurethane adhesive in solvent, when applied along PURBINDER C3, represents a high performance two-components adhesive system.

The laminates obtained with PURBINDER HPX 5147/C3 adhesive have outstanding heat, mechanical, chemical resistance and can be sterilised (30’ at 126°C).

Back to Top

News & Events